Hỗ trợ trực tuyến
  • image
    Kinh Doanh 1 - Mr Trình
    0918 377 786
    duytrinh@minhloan.com
  • image
    Kinh Doanh 2 - Mr Tuấn
    09 4747 1737
    anhtuan@minhloan.com
  • image
    Kỹ thuật - Mr Minh
    0918 377 786
    support@minhloan.com

Digium 1TE122PF (Non-EC)

Digium 1TE122PF (Non-EC)
Digium 1TE122PF (Non-EC)
Nhà sản xuất: Digium
Mã sản phẩm: Digium 1TE122PF (Non-EC)
Tình trạng: Còn hàng
Giá: 11.600.000đ
Trước Thuế: 11.600.000đ
Số lượng:     - Hoặc -   Thêm Yêu thích
Thêm so sánh

The Digium TE122PF is a high-performance, cost effective digital telephony interface card with the power to create a seamless network, interconnecting traditional telephony systems.

Used in conjunction with Asterisk®, the TE122P can be used to deliver a wide range of PBX and IVR services to the network or handset including Voicemail, Call Conferencing, Three-way Calling, and VoIP Gateways.

The TE122P is a single span, selectable T1 (24-channel), E1 (32-channel), or J1 (24-channel) card. The card utilizes Digium’s VoiceBus™ technology. VoiceBus technology allows the TE122 to use an industry standard bus-mastering PCI interface, as found in millions of PCs worldwide, to maximize system compatibility and eliminate system conflicts. Improving upon the prior TE120P which does not offer expansion capabilities, the TE122P may be combined with Digium’s VPMADT032 echo cancellation module to deliver 128ms of echo cancellation across 30 channels in E1 mode or 24 channels in T1 mode. Bundled with the VPMADT032, the product SKU is TE122P.

The TE122P supports both voice and data modes on its single span. For example, the card can support 12 channels dedicated to voice, routed directly to the Asterisk Open Source PBX, and 12 to data, handled by the underlying Linux operating system, thus eliminating the need for an external router. The TE122 works in both 3.3V and 5V PCI slots by auto detecting the slot’s voltage.

By utilizing our TDMoE (TDM over Ethernet) technology, an exclusive Digium process, you can easily connect multiple PCs equipped with the TE122 and achieve voice quality on par with single PBX implementations. Scalability for this product is derived from adding multiple TE122 cards to each individual PC. Add additional cards as you need them for your expanding applications.

The TE122P supports industry standard telephony and data protocols, including both RBS and Primary Rate ISDN (PRI) protocol families for voice and PPP, Cisco HDLC, and Frame Relay data modes. The board drives both line-side and trunk-side interfaces, including call

Viết đánh giá

Tên bạn:


Đánh giá của bạn: Lưu ý: không hỗ trợ HTML!

Bình chọn: Xấu           Tốt

Nhập mã kiểm tra vào ô bên dưới:



Mô tả

The Digium TE122PF is a high-performance, cost effective digital telephony interface card with the power to create a seamless network, interconnecting traditional telephony systems.

Used in conjunction with Asterisk®, the TE122P can be used to deliver a wide range of PBX and IVR services to the network or handset including Voicemail, Call Conferencing, Three-way Calling, and VoIP Gateways.

The TE122P is a single span, selectable T1 (24-channel), E1 (32-channel), or J1 (24-channel) card. The card utilizes Digium’s VoiceBus™ technology. VoiceBus technology allows the TE122 to use an industry standard bus-mastering PCI interface, as found in millions of PCs worldwide, to maximize system compatibility and eliminate system conflicts. Improving upon the prior TE120P which does not offer expansion capabilities, the TE122P may be combined with Digium’s VPMADT032 echo cancellation module to deliver 128ms of echo cancellation across 30 channels in E1 mode or 24 channels in T1 mode. Bundled with the VPMADT032, the product SKU is TE122P.

The TE122P supports both voice and data modes on its single span. For example, the card can support 12 channels dedicated to voice, routed directly to the Asterisk Open Source PBX, and 12 to data, handled by the underlying Linux operating system, thus eliminating the need for an external router. The TE122 works in both 3.3V and 5V PCI slots by auto detecting the slot’s voltage.

By utilizing our TDMoE (TDM over Ethernet) technology, an exclusive Digium process, you can easily connect multiple PCs equipped with the TE122 and achieve voice quality on par with single PBX implementations. Scalability for this product is derived from adding multiple TE122 cards to each individual PC. Add additional cards as you need them for your expanding applications.

The TE122P supports industry standard telephony and data protocols, including both RBS and Primary Rate ISDN (PRI) protocol families for voice and PPP, Cisco HDLC, and Frame Relay data modes. The board drives both line-side and trunk-side interfaces, including call

Đánh giá (0)

Viết đánh giá

Tên bạn:


Đánh giá của bạn: Lưu ý: không hỗ trợ HTML!

Bình chọn: Xấu           Tốt

Nhập mã kiểm tra vào ô bên dưới:



Sản phẩm liên quan

Bản quyền của Minh Loan Sài Gòn
Công ty TNHH Minh Loan Sài Gòn