Hỗ trợ trực tuyến
  • image
    Kinh Doanh 1 - Mr Trình
    0918 377 786
    duytrinh@minhloan.com
  • image
    Kinh Doanh 2 - Mr Tuấn
    09 4747 1737
    anhtuan@minhloan.com
  • image
    Kỹ thuật - Mr Minh
    0918 377 786
    support@minhloan.com

Digium 1TE210PF (Non-EC)

Digium 1TE210PF (Non-EC)
Digium 1TE210PF (Non-EC)
Nhà sản xuất: Digium
Mã sản phẩm: Digium 1TE210PF (Non-EC)
Tình trạng: Còn hàng
Giá: 18.100.000đ
Trước Thuế: 18.100.000đ
Số lượng:     - Hoặc -   Thêm Yêu thích
Thêm so sánh
Sản phẩm này có số lượng đặt tối thiểu 5

The Digium TE210PF is the next generation of Digium hardware that improves performance and scalability through bus mastering architecture.

The TE210P supports E1, T1, and J1 environments and is selectable on a per-card or per-port basis. This feature enables signaling translation between E1, T1, J1 equipment and allows inexpensive T1/J1 channel banks to connect with E1 circuits. Because the TE210P improves I/O speed by up to 10 times, the result is reduced CPU usage and increased card density per server.

Digium has designed the TE210P to be fully compatible with existing software applications and it is fully integrated with the Asterisk Open Source PBX/IVR platform. Also, the open source driver supports an API interface for custom application development. With the combination of Digium Hardware and Asterisk software, numerous combinations of telephony configurations are possible. From the traditional PBX to VoIP Gateways, Digium solutions are paving the way for a new generation of worldwide communications.

The TE210P supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported, also included are advanced call features.

The TE210P supports a 3.3v PCI slot only – typically available on newer server motherboards and in 64-bit PCI bus architectures.

Viết đánh giá

Tên bạn:


Đánh giá của bạn: Lưu ý: không hỗ trợ HTML!

Bình chọn: Xấu           Tốt

Nhập mã kiểm tra vào ô bên dưới:



Mô tả

The Digium TE210PF is the next generation of Digium hardware that improves performance and scalability through bus mastering architecture.

The TE210P supports E1, T1, and J1 environments and is selectable on a per-card or per-port basis. This feature enables signaling translation between E1, T1, J1 equipment and allows inexpensive T1/J1 channel banks to connect with E1 circuits. Because the TE210P improves I/O speed by up to 10 times, the result is reduced CPU usage and increased card density per server.

Digium has designed the TE210P to be fully compatible with existing software applications and it is fully integrated with the Asterisk Open Source PBX/IVR platform. Also, the open source driver supports an API interface for custom application development. With the combination of Digium Hardware and Asterisk software, numerous combinations of telephony configurations are possible. From the traditional PBX to VoIP Gateways, Digium solutions are paving the way for a new generation of worldwide communications.

The TE210P supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported, also included are advanced call features.

The TE210P supports a 3.3v PCI slot only – typically available on newer server motherboards and in 64-bit PCI bus architectures.

Đánh giá (0)

Viết đánh giá

Tên bạn:


Đánh giá của bạn: Lưu ý: không hỗ trợ HTML!

Bình chọn: Xấu           Tốt

Nhập mã kiểm tra vào ô bên dưới:



Sản phẩm liên quan

Bản quyền của Minh Loan Sài Gòn
Công ty TNHH Minh Loan Sài Gòn